Submersible Sump Pumps, Sewage Pumps and Systems

1/6 to 100 HP Sump, Effluent, Sewage, Grinders, and Dewatering Pumps. Features, benefits and versatility ahead of all the rest. Custom Sewage and Grinder LiftStations.

High quality residential Sump Pumps, both Vertical and Submersible, with your choice of Iron, Bronze, or PVC construction.

Ebara stainless steel sump pumps provide high corrosion resistance, continuous duty and air-filled bearings for reliable operation in sump or garden pond applications.

Milwaukee Pump Company

Featuring High Head Grinder Model HGP2
240’ shut-off head, flow rates up to 50 GPM
Balanced double stage design for long reliable service, ideal for long discharge runs and high static head applications. Meets requirements for rugged municipal service. Grit resistant silicone carbide seals, double ball bearing design, 1-1/4” discharge, bronze recessed vortex impellers, Hardened 440C stainless cutters.

Complete simplex and duplex packages including pit, panel, float switches, alarm, check valve and cover are available. "No job is too big or too small."

ABS Grinder Pumps and Packages

Standard and Custom, Simplex and Duplex Ejector Packages for Residential, Commercial, Industrial and Municipal Applications. Packages include selected Effluent and Sewage Grinder Pumps, Level Controls, Basins, Covers and Alarms, matched to meet your individual requirements. All assembled from in-stock components.

All Stainless Steel Constructed Submersible Sump, Sewage, Fountain, and Centrifugal Pumps. These models are available up to 2 HP and offer such features as double mechanical shaft seals, air filled motors can operate fully or partially submerged, continuous duty rated.

 

Sump Effluent & Wastewater Pumps

The Sump, Effluent and Wastewater product line is built to serve the wholesale wastewater markets. Consisting of several models including: vertical and submersible basement sump pumps, effluent, and 4" discharge submersible sewage pumps. All pumps in the Marlow line are offered individually or as part of a complete system. Packaged systems can include tanks, rails, float switches and control-alarm panels. Custom application assistance and system sizing is available
.
High Head Turbine Filtered Effluent Pumps

For new applications or to replace S.T.E.P. system effluent pumps for peat filter, mound systems, sand filter low pressure dosing systems and drip irrigation onsite wastewater systems. Design features for longer trouble-free operation; continuoous duty rating, stainless steel corrosion resistant construction, hermetically sealed motor.

Centrifugal Pumps

For Circulating, Swimming Pools, Turf Irrigation, Single and Two Stage Pressure Booster Pumps, Water Systems. 4", 6" and 8" Submersible Water Well Pumps, 5 GPM TO 1000 GPM Piston and Plunger Pumps for High Pressure Spraying, Industrial ANSI Pumps 1" to 6" pipe connection sizes.

Polylok Extend & Lok

This problem solving PBC pipe fitting was designed for easier septic filter Installation in hard to reach places. No more fighting with outlet pipes that are flush against the septic tank wall. Simply hammer in the PVC friction fit Extend & Lok™ and that’s it! The filter or inlet tee now can easily be installed and centered under the riser. Extend & Lok™ Makes for Easy Installation on existing systems. Many other uses too!

Ploylok Rain Drain

Shown here is a 12” diameter unit with grate cover, An optional 6” tall stackable riser can be added for greater depth. A 20” Diameter D-box is also available with either a solid or grate cover.

Collect down spouts of for use as an area drain, allows multiple configurations for inlets & outlets. As a Drain Box the plastic grate cover collects surface water for runoff. The 12” box comes with two seals and threaded nuts for watertight pipe connections. Optional risers (shown in photo) allow flexibility for installation at various elevations.

The 12” and 20" D-Boxes accept 2", 3", 4" Schedule 40 & 3" & 4" SDR 35 pipe sizes. Both models now accept 4” corrugated pipe. All Polylok risers have a patented tear off flange for casting into concrete that can be removed in frost prone areas when additional risers are added. The 12” (left) comes with anti-float feet to keep the unit stable during and after installation. All polylok D-boxes can be ordered with a solid or grate cover.

Engineered Products

Marlow Engineered Wastewater products are ideal for the industrial and engineered markets. Our products range from Submersible Effluent, Wastewater and Grinder Pumps to Self-Priming Wastewater Pumps. Marlow products are made to the highest quality standards and are built to last. Included are engineering services to assist in specification and sizing of larger wastewater systems. This line also includes self-priming high capacity and solids handling pumps featuring our world-renowned Trash Hog® pumps.

Centrifugal, Piston, Booster And Dewatering Pumps

Electric and Engine Driven Centrifugal Pumps for Water Service. Self Primers, Boosters, High Pressure Centrifugals, SAE kits for engine mounted pumps, PTO Pumps, Engine Driven Dewatering and Irrigation Pumps. Also Centrifugals with Double Seal, S. S. Fitted and ANSI Configuration for industrial and commercial service.

Cast Iron, Bronze and Stainless Steel Horizontal End Suction Centrifugal Pumps, Vertical Suspended Cantilever Pumps, Self Priming Dewatering Pumps, Boosters, Circulating Pumps and Double Seal Hot Oil Pumps, just to name a few of the models that can be made to order.

Cold and Hot Water High Pressure Washers, Engine Driven or Electric; Pressures to 4000 PSI, Lightweight Engine Driven Dewatering, Trash and Irrigation Pumps, 2" to 4". All popular options to meet every need.

Basins, Check Valves and Accessories

Fiberglass Basins of virtually any size, for use in sump and sewage applications. Factory packaged systems that include Guide Rail Systems, Inlet and Discharge Fittings, Valve Vault Boxes. Fiberglass Triple Garage Basins also used in places where volatile wastes are produced. An economically priced line of Polyethylene Sump and Sewage Basins in sizes of 18" x 22" up to 30" x 36".

High quality Fiberglass Sump and Sewage Basins, either Filament Wound or Matched Metal Molded for Uniformity and Strength. Matching Steel or Fiberglass Covers, Simplex or Duplex, with all necessary hardware for Gas Tight Operation. Diameters to 72", depths to 242". Standard 18x30, 24x36, 24x60, 24x72, 30x36 and 30x60 inch sizes in stock for immediate delivery. Also plastic check valves to meet all residential Sump/Sewage requirements. Basins made to order with or without Valve Vaults. Bring us the prints, we can make it.



Installer Friendly Series™ Panels
The new Installer Friendly Series™ control panels make programming pump control easy. IFS panels feature a simple, easy-to-use touch pad on the inner door. At a glance you can see pump functions, including: float status, pump run indicators, elapsed time meter(s), cycle counter(s), HAND/OFF/AUTO and more. The innovative Installer Friendly Series™ panels are available in simplex and duplex models for demand or timed dose applications and are designed to be easily converted to demand or timed dose application in the field. UL/cUL listed

Installer Friendly Series™ control panels are sold complete with float switches, electrical schematics, float terminal blocks, step-by-step installation instructions, a three-year limited warranty, and superior toll free technical support. Click on the following links for complete product information on Installer Friendly Series™ control panels: SJE Rhombus Installer Friendly Series Control Pump Panels Simplex, Duplex

Level Controls And Alarms

A Wide Variety of Liquid Level Sensing, Flow Control, Monitoring and Alarm Systems. Starters, Custom Panels, Alternators, Hydro Pneumatic Controls, Electrode Alarms, Tel-A-Signal Systems and Panels to Print.

See Water Oil Smart® Pump Controller

A stand-alone pump controller, requires no expensive electrical panels, will operate any pump up to and including 1HP. All models include built-in O N and OFF deferential of 2" or 6". The See-Water Oil Smart industrial grade switch differentiates between oil and water. Used to control pumps in elevator, utility, marine, and industrial sump applications. Installation will help prevent hydrocarbons from being pumped into the environment. Oil will not harm or contaminate this capacitive technology.

Water Powered Sump Pump Backup System

BasePump by BaseProducts is the most reliable sump pump backup. Float switch controlled and powered by the flow of city water BasePump works even when the electric power is out. No more worries during a thunderstorm. If a power outage causes your electric sump pump to fail BasePump will keep your new home theatre system dry!

Battery Powered Sump Pump Backup System

HydroPump is the finest battery powered sump pump backup system available. Using a pump that installs outside of the pit is a big advantage. A powerful motor and a finishing charger ensures delivery of maximum pumping when it’s needed most!

Hydropump PH-2500

Professional Model backup sump pump that works like a main sump pump. In fact, it uses a 110 Volt, 1/3 Horsepower sump pump to remove water from the sump. Connected to a Power Inverter, it automatically operates off two Deep Cycle Marine Batteries. The inverter takes the DC power provided by the batteries and converts it to 110 Volt power for use by the pump. A high capacity battery charger keeps the batteries in a fully charged condition and has a light monitoring system to alert you to the batteries’ condition. This is the complete, professional quality, high capacity backup sump pump system for your home. Because of the low power draw and high efficiency of this pump unit, the PH2500 can operate for 2 - 5 days or more, depending on how often it has to run. In most cases, this is more than enough to keep your basement dry during a power outage or main pump failure.

Zurn Chemical Drain Waste and Vent Piping

Zurn Specification Drainage Operation manufactures a variety of drainage and water control products that conform to A.N.S.I. standards. Zurn products are frequently specified by architects, mechanical engineers and plumbing contractors, and are sold into the non-residential commercial, industrial, and institutional construction markets. Consistent with its commitment to the plumbing industry, it was a natural progression for Zurn to enter the corrosive waste drainage market. Zurn chemical resistant Polypropylene and PVDF piping features a unique time and labor saving fusion pipe joint.

All-Bend Multi-Angle PVC Pipe Elbow

Finally, a pipe elbow with a selectable angle. Whether you need a 1/4, 1/8, 1/16 bend or any bend in between you’ll always have the right one for the job.

All-Bend® is an easy-to-use two-piece PVC elbow that can be cut and assembled to virtually any angle. This unique ability provides installers with unmatched flexibility and convenience while greatly simplifying the fitting of custom joints.

Each All-Bend® package comes complete with a two-piece selectable angle elbow, angle measuring templates and installation instructions. All-Bend® units are currently offered in white, rigid PVC for 1 1/2", 2", 3" and 4" pipe.

The All-Bend® is listed with IAPMO (Uniform Plumbing Code) and NSF International for ASTM standards D2665 (PVC Plastic Drain, Waste and Vent Pipe and Fittings) and also D2466 (PVC Plastic Pipe Fittings, Schedule 40).