Liquid Level Gages and Valves
 High
Quality Tyco Penberthy Water Level Gages, Liquid Level
Gages, Sight Flow  Indicators,
and Accessories for Boilers, Heaters, Tanks, and Other
 Vessels.
Shielded Tubular Gage Glasses, Magnetic Liquid Level
Gages, Calibrated Drum Gages, Pump Setting Gages,
Electronic, Capacitance liquid level measuring equipment.
Bronze Water Gages, Drain Valves, Air & Gas Cocks,
High & Low Pressure Safety Relief Valves, Vacuum
Relief Valves, and Fusible Plugs.
Safeguard Armored
Tubular Liquid Level Gages
 The
Safeguard Tubular level gage (shown with valves)
is an armored gage assembly that is about
one-tenth the cost of an armored flat glass gage.
Safeguard is perfect for applications where product
spills are not acceptable. Safeguard uses clear
or redline gage glass protected by a steel U-channel
with a clear polycarbonate see-thru window (with
or with or without no-charge gage scale.)
Made to order, Safeguards are available in
lengths up to 10-feet. Safeguard
uses 5/8" or 3/4" OD steel stubs installed
into a standard tubular  gage
valve set. This can minimize or eliminate
steam attack of the gage glass in this area resulting
in longer maintenance intervals.
To
meet your budgetary and corrosion requirements Safeguards
are available in all carbon steel, all stainless
steel, and carbon steel with stainless steel wetted
parts.
As a more economical alternetive
for new construction, Model 9900 has all the
features of the Safeguard with integral valves.
Replacement Gage Glass
 Maxos
and Duran Gage Glass products are distributed nationwide
through our network of Master Industrial Distributors
as well as Original Equipment Manufacturers.
 DURAN
Tubular Gage Glass; MAXOS Reflex, Plain, and High
Pressure Flat Glass for ALL makes of armored gages.
MAXOS Molded Disks and Special Cut Shapes, annealed
or tempered; in Borosilicate, Aluminosilicate, Quartz
and Soda-Lime Glass. All related accessories, such
as Gaskets, Washers, Mica Shields, Kel-F Shields,
Glass Cutters and cleaning brushes.
Yarway - Penberthy Boiler
Trim Level Gages and Alarms
 Penberthy
Series 1A single probe alarm system represents the
latest advancement in electronic level indication.
Based on the conductivity probe technology now widely
accepted in the industry, it was specially designed
to meet increasing demand for a reliable, cost effective
means of sensing water in various applications.
The probe can be mounted directly to the pressure
vessel or column. The probes are welded stainless
steel HP (left) and LP (right) electrode
with zirconia insulator (3000 psig @ saturation,
up to 1200°F [207 barg @ saturation, up to 649°C])
or threaded stainless steel LP electrode with  Teflon®
insulator (850 psig @ 525°F [58 bar-g @ 274°C]).
The Series 1A is a direct replacement for mechanical
float switches. Local LED indication of water level
provides either redundant or primary visual verification.
If you need a complete Color Port
Gage and Water column assembly or a replacement
electrode contact us to get more information
on all of Penberthy / Yarway’s line of Steam Water
Boiler Controls.
Process Equipment & Systems
 Jet
Products for Pumping Liquids, Pumping Gases, Heating
Liquids, Process Mixers for Liquid/Liquid, Gas/Liquid,
and Powder/Liquid. Ejectors, Eductors, Exhausters,
In-Line & Open Tank Heaters, Steam Spargers,
Mixers, and Circulating Tank Eductors.
Specialists in Custom Design and Manufacture of
Process Jet Equipment. Multiple Stage Vacuum Systems;
Boosters; Direct Contact Condensers and Heaters;
Thermal Compressors; Hydraulic Conveyor/Mixers and
PreMixers; Desuperheaters; Gas Coolers; and Heat
Recovery Systems.
Flow & Level Measurement and Control
 Direct
reading Liquid Level Gages and Valves. Armored and
Tubular Gages, Weld Pad Gages
& Sight Windows, plus the new MULTIVIEW Magnetic
Liquid Level Meter, combining visual indication,
point level control, and continuous level measurement
for process and steam water boiler trim applications.
Steam and Cold Water Washdown Stations with Detergent
option, Hot and Cold Water Mixing Stations; Observation
Equipment including Sight Windows with Illuminators,
Washers and Wipers; Sanitary Valves and Fittings;
Stainless Steel Manway and Tank Covers; and Stainless
Steel Spray Balls.
In-line Flow Meters for Liquids, Air, or Gases,
in a variety of materials for High Temperature or
High Pressure Service. Remote Readout Capability.
Sight Flow Indicators
 Cast
Sight Flow Indicators, available in Standard NPT
Threaded Sizes, and Flanged Models meeting ANSI
Standards for 150 lb., 300 lb., and 600 lb. Designs.
Dual Windows and Gaseous Sight Flow Indicators available.
Full-View Sight Flow Indicators with 360° viewing.
Sight Windows, from tiny ¼" Sight Plugs to
large 4" x 24" Oblong Sight Windows. Replacement
glasses and Gaskets for all brands.
Gear case oil gauges
 Gear
case oil gauges, threaded sight windows, oil line
gauges, plain oil gauges without shields, oil gauges
with unions. Oil gauges are made in standard sizes,
but can also be made in  various
combinations to meet special requirements sizes
from 1/8" to 2" - pipe thread and machine
thread.
Flexible Pipe Connectors
 Expansion
Joints of Rubber, Stainless Steel, and Teflon. Braided
Metal Hose Assemblies of  Stainless
Steel, Bronze, and Teflon Lined. Flexible Connectors
for expansion, vibration, and misalignment.  Flanged,
Threaded, Sweat, Socket and other end connections.
Used as Pump Connectors, Vibration Isolators, and
Expansion Joints. Flue Duct Joints.
 OCV
Hydraulically Operated Control Valves
Hydraulically operated, diaphragm
actuated Control Valves for multi-function control
of non-corrosive, non-abrasive fluids. Operate
off line pressure or, if  desired,
from an independent power source to meet virtually
any fluid handling and control need. Pressure
Relief, Differential Control, Solenoid Control,
Surge Anticipation, Rate of Flow, Pressure Reducing,
Altitude, Check, and Pump Control Valves. Plus
a new Digital Control Valve for distributed control
systems. Shown at above right is Pressure
Relief Valve Model 108. To the
left is Model 127, Pressure Reducing Valve.
C
Collins Instrument
Control Valves
 Highly
responsive corrosion resistant process control valves
specifically  designed
for use with corrosive media and in corrosive atmospheres.
Especially suited for use in Specialty Chemical,
Pharmaceutical, Food, Paper and Pulp and Municipal
process plants.
These specialized
control valves, stroking at 1/2-inch per second,
operate with unparalleled precision.
The differential area piston eliminates the necessity
for auxilliary loading regulators. Orders
for customized Cv vavles often ship in 2-days. Collins
valves are loaded with features that make them the
best process control valves available.
Zurn
Chemical Drain Waste and Vent Piping
 Zurn
Specification Drainage Operation manufactures a
variety of drainage and water control products that
conform to A.N.S.I. standards. Zurn products are
frequently specified by architects, mechanical engineers
and plumbing contractors, and are sold into the
non-residential commercial, industrial, and institutional
construction markets. Consistent with its commitment
to the plumbing industry, it was a natural progression
for Zurn to enter the corrosive waste drainage market.
Zurn chemical resistant Polypropylene and PVDF piping
features a unique time and labor saving fusion pipe
joint.
Scot Centrifugal,
Process and Booster Pumps
 Scot
Electric motor Centrifugal Pumps for Water Service
and Process. Self-Primers, Boosters,
High Pressure Centrifugals. Also Centrifugals
with Double Seals, Stainless Steel and Bronze
fitted and ANSI Configuration for industrial and
commercial service.
Cast Iron, Bronze and Stainless Steel Horizontal
End Suction Centrifugal Pumps, Boosters, Circulating
Pumps and Double Seal Hot Oil Pumps, just to name
a few of the models that can be made to order
with all popular options to meet every need.
Contact us for a complete Scot base mounted pump
or for replacement Scot Seal Kits and parts.
Full Featured Ball
Valves
 Models 31P
and 32P are Habonim’s line of one piece fully
flanged reduced bore ball valves in ANSI class
150# and 300#. Habonim’s flanged valves offer
tight shut-off, long service and high durability.
Available in sizes ½” through 8”
The 47P series is the main
line of Habonim 3-piece ball valves for industrial
applications. The
valves are suitable for applications requiring
high flow capacity and tight shutoff.
Sizes 1/4" - 6" (DN6 - DN150)
Flow Meters of all types
Shown here are Hedland E-Z
view flow meters
Direct reading, Install
in any position
360° rotatable guard/scale
Easier to read linear
scale
No flow straighteners
or special piping required
Relatively insensitive
to shock and vibration
Good viscosity stability
(40 to 500 SUS/4.2 to 108 cSt)
Units for other viscosities available
Temperature up to 240
°F (116 °C)
Pressure up to 6,000 psig
Accuracy ±2% full scale
Repeatability ±1%
|
